Table of Contents
Advertisement
SYSTEM Setup
System Setup Operation
The Parking Brake must be engaged to access the SYSTEM
mode screen. Attempting to access this screen while driving will
display the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
"Setting item" of SYSTEM Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SYSTEM SETUP].
The SYSTEM SETUP screen appears.
3
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
*1
IN INT. MUTE
/ IN INT. ICON / REMOTE SENSOR
CAMERA IN / NAV. IN / NAV. MIX
*4
AUX IN SIGNAL
/ AUX OUT / BLUETOOTH IN /
USB ADAPTER / VISUAL KEY
*6
AUX+ IN / AUX+ LEVEL
*1
Displayed only when BLUETOOTH IN is OFF.
*2
When ON is set in "Setting the Picture Output" (page 40), the item is
displayed.
*3
When ON is set in "Setting the Navigation Mode" (page 40), the item
is displayed.
*4
Not displayed when OFF is set in "Setting the AUX Mode"
(page 40).
*5
Not displayed when OFF is set in "Setting the Navigation Mode"
(page 40).
*6
Not displayed when OFF is set in "Setting the AUX+ Mode"
(page 41).
4
Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
*2
/
*3
*4
/ AUX IN / AUX IN LEVEL
*5
/ OPTION KEY / OPTICAL OUT /
Setting the External Device Interrupt Mode
If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the
IVA-W505R/IVA-W502R, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to the
voice guidance of your navigation system when it occurs even while
you are playing a CD or DVD. The CD/DVD player will be
automatically muted during voice guidance. For further details, please
refer to the manual for
NVE-K200.
Setting item: IN INT. MUTE
Setting contents: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON:
Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
Setting the Interrupt Icon Display
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN INT. ICON
Setting contents: INT / TEL
/
INT:
The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Switching the function of the remote
sensor
For optional remote control operation, the remote sensor of the external
device (monitor, etc.) can be switched, as you prefer.
Setting item: REMOTE SENSOR
Setting contents: FRONT / REAR
FRONT:
The remote sensor of this unit is effective.
REAR:
The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
• If a touch panel rear monitor (connected to the Alpine rear monitor
output via the Monitor control lead) is touched, the command is
executed regardless of the remote control sensor switch setting. Note,
however, that the remote control sensor that has been set takes
priority if it has been 5 seconds since last touching the panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR, some soft button operations
( [
] STOP, etc.) cannot be performed. In this case, set the remote
control sensor to FRONT.
39
-EN
Hide quick links:
Advertisement
Table of Contents
