System Example - Alpine IVA-W505R Owner's Manual

System Example

Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), Navigation system, DVD player and
changer.
NVE-N077PS/NVE-N099P
Navigation system
(Sold Separately)
Ai-NET cable
(White/Brown)
(White/Brown)
REMOTE OUT
REMOTE IN
12
• When the fiber optic compatible product is connected, it is necessary to set the mode of this unit. Refer to "Setting the Digital Output" (page 41)
and set to ON.
• When the NVE-N055PS is connected for the Navigation System, use the RGB conversion cable KCE-030N (Sold Separately).
Please observe the following when using Fiber Optic Cable (Optical Digital Cable).
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
82
-EN
NORM EQ/DIV
7
(Yellow)
13
DVD Video Player
(Ai-NET)
(DVA-5210 etc.)
(Sold Separately)
Optical Digital Cable (KWE-610A)
Fiber optic digital Input
terminal (for head unit)
Audio Processor (Ai-NET)
(Fiber Optic Digital
compatible) (Sold
Fiber optic digital
Separately)
Input terminal (for
DVD Player)
Fiber optic
cable
Ai-NET cable
10
14
*Only connect fiber optic digital compatible CD Changer
Fiber optic digital
Input terminal (for
Changer)
Ai-NET
cable
*Fiber optic cable
CD Changer
(Ai-NET)
(Sold Separately)