Setting The Downmix Mode; Setting The Tv Screen Mode; Setting Of The Bonus Code; Setting Of The Dvd-Audio Playback Mode - Alpine IVA-W505R Owner's Manual

Setting the Downmix Mode

This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND / STEREO
SURROUND: Surround compatible Downmix
Stereo Downmix
STEREO:

Setting the TV Screen Mode

Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-W505R/IVA-W502R.
If the rear monitor is not connected, the screen setting is 16:9.
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc's jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
34
-EN
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.

Setting of the Bonus Code

Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc., of the disc, for the code
number.
Setting item: BONUS CODE
Setting content: CODE
1
Touch [CODE].
The 10 key input screen is displayed.
2
Input the 4 digit code number given on the jacket of
the disc, etc.
3
Touch [ENT] to memorize the number.
• If the code number of the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display. If a new code number is input, this code number will
be replaced.

Setting of the DVD-Audio Playback Mode

To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A SETUP
Setting contents: VIDEO / VCAP / VOFF
VIDEO: Only DVD Video is played back if the disc contains
DVD Video and Audio.
VCAP: DVD Audio is played back with Video.
VOFF: DVD Audio is played back without Video.