Table of Contents
Advertisement
Navigation System
(Optional)
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the
IVA-W505R/IVA-W502R, the Navigation screen can be displayed on
this unit.
1
Touch [SOURCE] on the main source screen.
The source screen appears on the display.
2
Touch [NAV.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner's Manual of the
navigator.
• The Navigation mode is selected in "Setting the VISUAL Soft
Button" (page 41)." The navigation mode is activated through the
VISUAL Button without interrupting normal audio.
• If the Navigation mode menu is not displayed on the main menu
screen, select ON in "Setting the Navigation Mode" (page 40).
• When the Navigation System is on and in guidance mode, the voice
prompts and navigation map interrupts the current audio source.
Portable Navigation System Operation
(Optional)
An optional Alpine Portable Navigation System is controllable from the
unit. For details on operation, refer to the Owner's Manual of the
Portable Navigation.
A BOX type navigation system and portable navigation cannot
be connected at the same time.
If the Built-in Dock is used for IVA-W505R
About dockable BLACKBIRD series or Portable Navigation devices
with this unit.
• Docking to the PMD-B100 is not possible.
• For information on docking a portable navigation to the unit, consult
your Alpine dealer.
1
Press OPEN on the unit.
The unit changes to the EJECT/TILT screen.
2
Touch [OPEN].
The movable monitor will open.
3
Remove the slot panel, then insert the Portable
Navigation device in the unit (See the illustration
below).
Optional Portable
Navigation
• The slot panel can be detached by placing a finger in the hole in the
centre of the panel and pulling it down.
• If the face plate is attached, first remove the face plate, then the slot
panel. After removing the slot panel, reattach the face plate.
4
After inserting, touch [CLOSE] on the EJECT/TILT
screen.
The movable monitor will close.
5
Press SOURCE.
The SOURCE selection screen is displayed.
6
When the source name of [NAV.], on the SOURCE
selection screen is displayed, touch the desired
source name.
• For details on operation, refer to the Owner's Manual of the Portable
Navigation device.
Removing the Portable Navigation Device
1 Press OPEN on the unit.
The display changes to the EJECT/TILT screen.
2 Touch [EJECT] of NAV. on the EJECT/TILT screen.
The movable monitor will open.
3 Press
behind the monitor.
The Portable Navigation device is removed.
If an Optional Docking Station is used for
IVA-W505R
1
Select the NAV. in "Setting the AUX Mode" (page 40).
2
Mount the Portable Navigation device to the optional
docking station.
The connection to the Portable Navigation device is
recognized in steps 1 and 2.
3
Press SOURCE.
The SOURCE selection screen is displayed.
4
Touch [NAV.].
For details on operation, refer to the Owner's Manual of the
Portable Navigation device.
Portable Navigation Slot
Push
57
-EN
Hide quick links:
Advertisement
Table of Contents
