Rear Panel - Onkyo BR-925 Instruction Manual

Getting to Know the CD/HDD Receiver—Continued

Rear Panel

1 2 3
7
The page numbers in parentheses show where you can find the main explanation for each item.
ETHERNET (21)
This socket is for connecting a broadband router
using a commercially available LAN cable.
LINE 1 IN (20)
These terminals are for connecting audio output of
external devices such as TV or turntable with a
built-in phono equalizer.
MD/TAPE (LINE 2) IN/OUT (19)
These analog audio inputs and outputs are for con-
necting a recorder with an analog input and output,
such as a MiniDisc recorder or cassette deck.
DOCK/CDR (LINE 3) IN/OUT (19)
This analog audio input and output are for connect-
ing an Onkyo RI Dock. The input and output can
also be connected to a CD recorder or recording
device.
SPEAKERS (16)
These terminal posts are for connecting speakers.
SUBWOOFER PRE OUT (20)
This jack is for connecting a powered active sub-
woofer.
OPTICAL DIGITAL IN (20)
This optical digital audio input can be used to con-
nect a component with an optical digital output,
such as a CD recorder, MD recorder, games con-
sole, satellite tuner, or personal computer. Use a
commercially available optical digital audio cable
(square) to make the connection.
12
4
8 9 bk
5
Heat sink
REMOTE CONTROL (19)
This (Remote Interactive) jack can be con-
nected to an
The CD/HDD receiver's remote controller can then
be used to control that component. To use
must make an analog audio connection (RCA)
between the CD/HDD receiver and the other com-
ponent.
FM ANTENNA (17)
This jack is for connecting an FM antenna.
AM ANTENNA (17)
These push terminals are for connecting an AM
antenna.
Power cord (22)
The power cord should be connected to a suitable
power source (plug type varies from country to
country).
See pages 15–21 for connection information.
Caution:
The heat sink is a device designed to disperse heat from
within the CD/HDD receiver. Do not to place objects
around the CD/HDD receiver and ensure that there is ade-
quate ventilation all around the CD/HDD receiver. If the
ventilation is inadequate, the CD/HDD receiver may over-
heat, leading to malfunction.
6
bl
jack on another Onkyo component.
, you