Onkyo BR-925 Instruction Manual page 69

Cd/hdd receiver
Table of Contents

Advertisement

Advanced Setup—Continued
Entering DHCP Settings Manually
You can enter DHCP settings such as the IP address, sub-
net mask, default gateway, or DNS server manually. Fol-
low these steps when you want to assign the fixed IP
address for network connection, or to assign the DNS
server address specified by your ISP.
1 Press the [TOOLS] button.
2 Use the Up and Down [ ]/[ ] buttons to select
"Network", and then press [ENTER].
3 Use the Up and Down [ ]/[ ] buttons to select
"DHCP", and then press [ENTER].
4 Use the Up and Down [ ]/[ ] buttons to select
"Manual", and then press [ENTER].
5 Use the Up and Down [ ]/[ ] buttons to select
settings you want to enter, and then press
[ENTER].
6 Enter the settings.
Use the number buttons to enter, and then press
[ENTER] to save the settings.
Network
IP Address
:192. 168. XXX. XXX
Network
Subnet Mask
:255. 255. XXX. XXX
Network
GatewayAddress
:192. 168. XXX. XXX
Network
DNS Address
:192. 168. XXX. XXX
7 Press the [RETURN] button.
The confirmation message appears. Select "OK" in
the "Save Setting?" message, and then press the
[ENTER]. After the "Saving Settings" message is
displayed, the screen returns to the menu list.
Setting the Proxy
Configure the Proxy setting when your ISP specifies it.
If not specified, the Proxy setting is not necessary.
1 Press the [TOOLS] button.
2 Use the Up and Down [ ]/[ ] buttons to select
"Network", and then press [ENTER].
3 Use the Up and Down [ ]/[ ] buttons to select
"Proxy", and then press [ENTER].
4 Use the Up and Down [ ]/[ ] buttons to select
"On", and then press [ENTER].
5 Use the Up and Down [ ]/[ ] buttons to select
settings you want to enter, and then press
[ENTER].
6 Enter the settings.
Use the number buttons to enter, and then press
[ENTER] to save the settings.
Network
Proxy Port
Network
Proxy Address
a]
proxy. XXX. jp
Network
Proxy UserName
a]
proxy
Network
Proxy Password
A]
7 Press the [RETURN] button.
The confirmation message appears. Select "OK" in
the "Save Setting?" message, and then press the
[ENTER]. After the "Saving Settings" message is
displayed, the screen returns to the menu list.
:
80
69

Advertisement

Table of Contents
loading

Table of Contents