Setting For Recording - Onkyo BR-925 Instruction Manual

Cd/hdd receiver
Table of Contents

Advertisement

Recording (Transferring Data)—Continued

Setting for Recording

Before starting the recording, set the format and bit rate.
Format is a data form of tracks to be recorded. Bit rate
means the quantity of information for recording.
When the quantity of information increases, the sound
quality becomes better, however the data volume
becomes larger.
The data volume and available USB devices that can
transfer the data depends on the format. Select a proper
and optimum format.
Format
Extension
MP3
(MPEG-2
*.mp3
Audio
Layer-3)
*2
WMA
(Windows
*.wma
Media Audio
V8.0)
WAV
*.wav
*1 This is the default setting. However, 128 kbps is set in the case
of the data transfer to the USB devices.
*2 Copyright protected WMA files cannot be recorded or trans-
ferred.
Note:
AAC files cannot be recorded to the CD/HDD receiver but
only can be transferred via USB port (between HDD and
USB devices).
1
Press the [TOOLS] button.
2
Use the Up and Down [ ]/[ ] but-
tons to select "Record", and then
press [ENTER].
Tool
Record
Audio
Sampling
Bit rate
frequency
128 kbps
160 kbps
44.1 kHz
192 kbps
*1
256 kbps
128 kbps
160 kbps
44.1 kHz
192 kbps
3
Use the Up and Down [ ]/[ ] but-
tons to select the record mode,
and then press [ENTER].
When the destination of recording is
USB device, select "USB Record
Mode". When the destination of record-
ing is HDD, select "HDD Record
Mode".
Record
USB Record Mode
HDD Record Mode
(The above is an example when USB
Record Mode is selected.)
4
Press the Up and Down [ ]/[ ]
buttons to perform the settings for
recording.
Record
USB Record Mode
(The above is an example when WMA
file and 128 kbps are selected.)
5
Press [ENTER].
"Complete!" will be displayed, and the
settings for recording have been done.
:WMA 128 kbps
Format and bit rate
47

Advertisement

Table of Contents
loading

Table of Contents