Various Playback Modes - Onkyo BR-925 Instruction Manual

Playing the HDD—Continued

Various Playback Modes

PLAYLIST REG
BGM MODE
ENTER
BGM Playback
The music files* recorded in the HDD can be played
repeatedly in random order with one button. It is conve-
nient when you want to play music as BGM.
* Except for the music files recorded from FM/AM or external
components.
Press the BGM MODE [
You can also press the [LIBRARY] button and select
"BGM" to start BGM playback (see page 55).
Canceling BGM playback
To cancel BGM playback, press the BGM MODE [
button again.
Repeat/Random Playback
With random playback, selected tracks can be played in
random order. With repeat playback, tracks or one track
can be played repeatedly. See "Random Playback" and
"Repeat Playback" on page 31.
Press the [RANDOM] button or the [REPEAT] button
(repeatedly).
Tip:
The "REPEAT" indicator on the display means that all
tracks in the current list (tracks, artist, album or playlist)
are played repeatedly.
The "REPEAT 1" indicator means that only the selected
track is played repeatedly.
Note:
During the random playback, you cannot operate the
[LIBRARY] button and [RETURN] button, and cannot
select tracks by specifying the track number. To perform
these operations, cancel the random playback.
/
REPEAT
RANDOM
] button.
]
Creating and Playing the Playlist
You can select your favorite tracks in numerous music
files in the HDD and add them to the playlist.
■ Adding a track to the playlist
1
Select a track (in the HDD) you
want to add to the playlist.
2 Press the [PLAYLIST REG] but-
ton.
Tips:
• You can create a playlist of up to
60,000 tracks.
• You can also press the [TOOLS] button
and select "Add Playlist" to add the
track.
• You can also use the CD/HDD
receiver's REC button to add the track.
3 Use the Up and Down [ ]/[ ] but-
tons to select "PLAYLIST 1", and
then press [ENTER].
Tip:
When you select "PLAYLIST ALL" all
tracks in the folder (album) are added.
4
Use the Up and Down [ ]/[ ] but-
tons to select a desired playlist,
and then press [ENTER].
"Complete!" will be displayed, and the
selected track has been added to the
playlist.
■ Playing the playlist
1 Press the remote controller's INPUT [ ]/[ ]
buttons to switch the input source to HDD.
2 Press the PLAYLIST [ ]/[ ] buttons.
Each time the button is pressed, the CD/HDD
receiver changes the playlist and starts playback.
Tip:
A playlist name can be changed afterwards. See "Editing
a Playlist Name" on page 61.
Track 01
Track 02
PLAYLIST
1
PlayList1
PlayList2
57