Table of Contents
Advertisement
Listening to the Radio
Tuning into AM/FM Radio Stations
The CD/HDD receiver won't pick up any radio signals without an antenna connected, so you must connect the antenna
to use the tuner (see page 17).
Switch the input source to
FM or AM (see page 24).
1
2
Adjusting the Antennas
Adjusting and installing the FM antenna
Choose a location for the FM antenna while listening to an FM station.
1
Change the direction of the
antenna to achieve the best
reception.
32
When tuned into a station, the Tuned
When tuned into a stereo FM station, the FM STEREO indicator
appears as well.
TUNER
FM 87.50 MHz – – ch
Band
Press the [ENTER] repeatedly to select the tuning mode.
• Auto Tuning Mode
The AUTO indicator appears and stereo radio recep-
tion is possible.
• Manual Tuning Mode
The AUTO indicator is not displayed and radio reception will be in mono.
Use the Fast Reverse and Fast Forward [
a station.
In Auto tuning mode, once a station is found, tuning stops automatically.
Radio Frequency can be changed in 0.05 MHz steps for FM and 9 kHz or 10 kHz steps
for AM.
In Manual Tuning mode, the frequency stops changing when you release the button.
Press the button repeatedly to change the frequency one step at a time.
2
Affix the antenna with a thumbtack. (Do not
push the thumbtack through the antenna.)
Caution:
Be careful not to prick your finger!
indicator appears.
FM STEREO
AUTO
Frequency
Adjusting the AM antenna
Adjust the location and position of the AM
antenna while listening to an AM station to
achieve the best reception.
ENTER
/
( TUNING
/
)
AUTO indicator
]/[
] buttons to tune into
Advertisement
Table of Contents
