Procedure 9. Al4 And Al5 Assemblies; Al4 And Al5 Assembly Removal - HP 8560A Service Manual

Procedure 9. Al4 and Al5 Assemblies

R e m o v a l
1. Remove the analyzer's cover as described in Procedure 1, "Analyzer Cover."
2. Place the analyzer on its right side frame.
3. Remove the eight screws and washers holding the Al4 and Al5 assemblies to the bottom of
the analyzer. These screws are labeled 1 and 2 in Figure 3-19.
Washers are not captive. Loose washers in instrument may cause internal
Caution
damage.
3-34 Assembly Replacement
Figure 3-19. Al4 and Al5 Assembly Removal
1
1
r