HP 8560A Service Manual page 444

Component-Level Information Packets
Component-Level information is available for selected instrument assemblies. The information
for each repairable assembly is provided in the form of Component-Level Information Packets
(CLIP ). Each CLIP contains a parts list, component-location diagram, and schematic
S
diagram. Each CLIP has an HP part number which is changed whenever the HP part number
for its related instrument assembly is changed.
Table A-l lists board assembly part numbers and corresponding component-level information
packet (CLIP) part numbers. Table A-2 lists documented A4 Log Amplifier and Al6 CAL
OSC Board Assemblies shipped with HP 8560A Spectrum Analyzers serial prefixed below
3207A. Table A-3 lists documented RF board assemblies shipped with HP 8560A Spectrum
Analyzers serial prefixed below 3029A.
Updated or replacement CLIP
Service office using the CLIP part numbers provided in the following tables.
A complete set of the latest version of CLIP
5958-7187.
CLIP are packaged in protective plastic envelopes. To use and store your CLIP
S
the following accessories are available.
inch
CLIP
2 inch
CLIP binder (for 15 to 25 packets)
Replacement plastic CLIP envelopes
Note CLIP may not be available for recently introduced assemblies.
S
may be ordered through your local Hewlett-Packard Sales or
S
can be ordered using HP Part Number
S
binder (for 25 to 30 packets) part number
HP 9282-1134
HP part number 9282-1133
HP part number 9282-1132
HP part number 9222-1536
Component-Level Information Packets A-l
effectively,
S