HP 8560A Service Manual page 27

2. Install the front-panel cover on the instrument.
3. Wrap the instrument in antistatic plastic to reduce the possibility of damage caused by
electrostatic discharge.
4. Use the original materials or a strong shipping container that is double-walled, corrugated
cardboard carton with 159 kg (350 lb) bursting strength. The carton must be both large
enough and strong enough to accommodate the analyzer and allows at least 3 to 4 inches
on all sides of the analyzer for packing material.
5. Surround the equipment with at least 3 to 4 inches of packing material, or enough to
prevent the equipment from moving in the carton. If packing foam is unavailable, the best
alternative is SD-240 Air Cap TM from Sealed Air Corporation (Commerce, CA 90001).
Air Cap looks like a plastic sheet covered with l-1/4 inch air-filled bubbles. Use the
pink-colored Air Cap to reduce static electricity. Wrap the equipment several times in this
material to both protect the equipment and prevent it from moving in the carton.
6. Seal the shipping container securely with strong nylon adhesive tape.
7. Mark the shipping container "FRAGILE, HANDLE WITH CARE" to assure careful
handling.
8. Retain copies of all shipping papers.
General Information l-9