Opc:initiate; Opc; Initiate; Condition - Agilent Technologies E1445A User's Manual And Scpi Programming Manual

STATus
Subsystem Syntax

:OPC:INITiate

Parameters
Comments
Example
382 Command Reference
STATus

:OPC

:INITiate <
:OPERation

:CONDition?

:ENABle <

[:EVENt]?

:NTRansition <
:PTRansition <
:PRESet
:QUEStionable
:CONDition?
:ENABle <
[:EVENt]?
:NTRansition <
:PTRansition <
STATus:OPC:INITiate <
commands will complete immediately or whether they will wait for waveform
generation to complete. With state
immediately. With state
true by INITiate:IMMediate
idle state and that waveform generation has completed or been aborted by the
ABORt or *RST commands.
Parameter Parameter
Name
state boolean
< >
Executable when Initiated: Yes
Coupling Group: None
Related Commands: *OPC
STATus:PRESet
*RST Condition: Unaffected
Power-on Condition:
Setting Immediate Completion Mode
STAT:OPC:INIT OFF
state >
unmask >
unmask
>
unmask >
unmask >
unmask >
unmask >
state > controls whether the
set, these commands will complete
OFF
set, they will wait for the Pending Operation Flag set
ON
to return false, indicating that the trigger system is in the
Range of
Type Values
OFF | 0 | ON | 1
, *OPC? , *RST , *WAI
STATus:OPC:INITiate ON
Completes immediately for *OPC, etc.
[query only]
[query only]
[no query]
[query only]
[query only]
*OPC , *OPC? , and *WAI
Default
Units
none
, ABORt , INITiate:IMMediate
Chapter 8
,