Confirmation Of Projector Status - Mitsubishi Electric PJLink FD630U User Manual

Lan control utility
Hide thumbs Also See for PJLink FD630U:
Table of Contents

Advertisement

5. Operation of projector

5.2. Confirmation of projector status

The status of the projector is displayed on the projector list on the main screen.
Item
Check
No.
Projector Name
MAC Address
IP Address
Power
Input Source
AV Mute
Lamp Time (Low)
Group Name
*1
DIGITAL 1 and DIGITAL 2 are enabled in HDMI or DVI. For the details of the functions, see the projector's
User Manual.
• The projector status is re-obtained (refreshed) automatically and periodically, but the present status can also be
obtained by the user's instruction. When clicking [Refresh Status] of the tool bar on the main screen, Power, Input
Source, AV Mute, and Lamp Time (Low) status of each projector is re-obtained.
• The status of Input Source and AV Mute will not be obtained under the following conditions:
- when the projector is powered off
- during warm-up or cool-down.
• When clicking the status tag of the projector list (except the MAC address), the list can be rearranged (sorted).
The list can be rearranged in reversed order by pressing one more time.
• When clicking [Select All] of the tool bar, all projectors in the projector list become selected/non selected state.
• If any abnormal state of the projector is detected by acquiring the projector status, an error message will be
displayed on the error message display column at the lower part of the screen.
<Note>
• The default cycle of the automatic re-acquisition is 10 minutes. To change this cycle, see "3.1. System settings."
• When multiple projectors are connected, it may take time to acquire the status. During acquiring the status, the
status bar at the lower part of the main screen becomes "Getting status...", and it becomes "Done" when the
acquisition has been completed.
Description
Theft detector setting (ON/OFF)
Projector list registration number
Projector name set in the application
MAC address of the projector
IP address of the projector
Power supply status of the projector (ON/OFF)
Input signal of the projector (COMPUTER 1/COMPUTER 2/VIDEO/S-VIDEO/
*1
DIGITAL 1
/DIGITAL 2
Mute status of the projector (ON/OFF)
Lamp illuminating time (HHHH:MM)
The belonging group of projector
15
*1
/NETWORK)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents