Mitsubishi Electric PJLink FD630U User Manual page 8

3. Main screen
Select All
Exit
C
Group Name
D
Status tag
E
Projector list display column
F
Error Message
G
Operation status display column
All projectors currently displayed on the projector list can be set to
selected/non selected state.
You can exit "ProjectorView Global+". However, you cannot exit the
application during the automatic projector search and the projector
status loading. Even during the projector status acquisition, you can
exit the application forcefully by clicking the
corner of the main screen. In this case, Windows warning message is
displayed.
Group of the projector can be selected. When you select "All", all the
registered projectors are displayed. Newly created group(s) are added
to the list. When you select your choice of group, all projectors that
belong to the selected group are displayed.
Property and status of the projector can be indicated.
When clicking each tag button (except the MAC address), the list can
be rearranged (sorted).
List of the projector which belongs to the selected group can be
displayed.
Status of the projector can also be displayed.
The display color changes as follows depending on the condition of the
projector:
• Black: In normal condition
• Red: In abnormal condition (→ Check the abnormal condition by
ProjectorView. When the communication fails, see "12.1.
Troubleshooting.")
• Black (yellow background):
Warning about the lamp lifetime
• White (red background):
The communication with the projector monitored by the
theft detector has been disrupted. (→ Check the condition.
There is a possibility of theft.)
• Gray: In communication inoperable condition
Error messages detected in communicating with the projector can be
displayed.
Operation status of "ProjectorView Global+" can be indicated.
Operation status during communication processing by remote-
controlling and schedule can be indicated.
8
button at the upper right