Main Screen - Mitsubishi Electric PJLink FD630U User Manual

3. Main screen

C
D
E
F
G
A
Menu bar Configuration
Help
B
Tool bar ProjectorView
Telnet
Visual PA2
Remote Controller
Refresh Status
A
You can specify the following settings:
• Add New Group:
• Edit Schedule Setting:
• Search Projector:
• Assign IP:
• Edit Projector Setting:
• Edit E-mail Setting:
• Search Projector Setting: You can specify a search range for
• System Configuration:
The version information is displayed.
You can control each projector separately using a Web browser.
In case of an error in the projector, the details of the error are displayed.
For details, see page 20.
You can make various settings using Telnet. (Telnet enabled projectors
only)
You can set the password, ProjectorView display language, LAN
control, and PJLink certification. For details, see page 28.
You can display a line of any text on the projector screen (Visual PA2
enabled projectors only).
For details, see page 25.
Remote Controller window can be displayed to operate the projector.
You can turn on/off the power, and select the input source.
The current status of Power, Input Source, AV Mute, and Lamp Time
(Low) of the projectors being displayed in the projector list can be
reacquired. The status of Input Source and AV Mute will not be
obtained under the following conditions:
• when the projector is powered off
• during warm-up or cool-down.
B
You can create a new group.
You can edit schedule settings set for
existing groups.
Automatically searches available
projectors.
You can configure IP settings of the
projector.
You can edit projector settings.
You can configure E-mail settings used for
this application.
communication with the projector via a
router.
You can configure system settings of this
application.
7