Usb; Audio - ADDER AdderLink X-Series Manual

USB

1 Locate the supplied USB cable and insert the smaller connector into the
LOCAL module socket marked
2 Attach the other end of the USB cable to one of the USB sockets of the host
PC.
Note: When connected to a USB port of the PC, the LOCAL module does
not require the use of a power supply unit (the REMOTE module, however,
always requires a power supply).
.

Audio

1 Locate the supplied audio cable and attach one end to the required jack
socket marked (speaker) or
(if you need to simultaneously use the speaker and microphone connections,
a second audio link cable will be needed).
2 Insert the plug at the other end of the audio cable to appropriate socket on
the PC system:
• Microphone sockets are often coloured pink
• Speaker sockets are often coloured light green.
(microphone) on the LOCAL module
6