Configuration; Connecting To Digital Ipeps - ADDER AdderLink Digital iPEPS User Manual

Configuration

Connecting to Digital iPEPS

Connection to (and configuration of) Digital iPEPS is carried out over a network,
using a VNC Viewer program running on a computer or mobile device. VNC
Viewers are available for most computers, tablets and smartphones.
• If you already have a VNC viewer, please follow the Initial configuration
instructions given on the next page.
If you do not already have a VNC viewer, there are three options:
• You can download a Windows VNC Viewer from the Digital iPEPS itself.
• You can download the latest VNC Viewers for most operating systems via
the RealVNC website, or for tablets and smartphones from the appropriate
app store.
• Without downloading anything, you can run a Java version of the VNC
Viewer inside your web browser.
To download a Windows VNC Viewer from the Digital iPEPS unit
Note: The version of VNC supplied within the Digital iPEPS supports audio,
however, audio is not supported in the later viewers from RealVNC.
1 Connect the Digital iPEPS to an IP network where a suitable computer
is available on the same subnet (please see the Installation chapter for
connection details).
2 On that computer, open an internet browser and enter the default local IP
address used by the Digital iPEPS:
http://192.168.1.42
The Digital iPEPS welcome screen should be displayed:
3 Click the link Download the Windows VNC Viewer from unit.
4 Once the file is downloaded, run it and follow the on screen instructions
to open a VNC connection to the Digital iPEPS. (The VNC Viewer is a single
executable file which does not require an 'installation' step. Simply put the
file in a suitable place (such as the Desktop) and run it from there.)
To download a VNC Viewer
To download a (free) VNC Viewer for a desktop or notebook computer, visit the
download page of the RealVNC website:
http://www.realvnc.com/download/viewer
To download a VNC Viewer app for a tablet or smartphone, visit the Apple or
Android app store, or look at the RealVNC website (www.realvnc.com) for
further information.
To use the Java VNC Viewer
1 Connect the Digital iPEPS to an IP network where a suitable computer
is available on the same subnet (please see the Installation chapter for
connection details).
2 On that computer, open an internet browser and enter the default IP
address used by the Digital iPEPS:
http://192.168.1.42
The Digital iPEPS welcome screen should be displayed (as shown above).
3 Click the link Connect using built-in Java VNC Viewer. The Java viewer will
load and run inside the browser. For more details see
viewer options.
Appendix 3 - Java
10