Controls; Single Mouse Mode; Resync Mouse; Refresh Screen - ADDER AdderLink Digital iPEPS User Manual

Controls

When clicked, this button reveals a menu of
options concerned with keyboard, video and
mouse operation.

Single Mouse Mode

This mode is for fast network connections where
the cursor response is sufficient to provide instant
visual feedback on the remote screen. When
enabled, the cursor is 'captured' within the viewer
window until you use the 'escape' hot keys.
To quit from single mouse mode, press F8 and then P. Alternatively, enable and
use the mouse button escape sequences - see
for details.
The single mouse mode does not require calibration.

Resync Mouse

This option has the same effect as the
synchronises the local and remote mouse pointers.

Refresh Screen

This option refreshes the whole screen image to remove any artefacts from
moved screen items. This is useful when using very low refresh rates on slow
speed communication links.
Advanced unit configuration
button on the menu bar and re-

Mouse Control

This option displays a mouse control dialogue and is useful when the remote
cursor is failing to respond correctly to your mouse movements, even after using
the Resync mouse option.
The mouse control dialogue allows you to control the remote mouse cursor
using a selection of buttons that you click with your local mouse.
Click to produce a single
mouse click for the left,
centre or right mouse
buttons
Click to move the remote
mouse cursor up, down,
left or right
Click to display
the Advanced
Mouse
Configuration
dialogue. See next
page.
Click to produce a
continuous mouse click
and hold for the left,
centre or right mouse
buttons
Click to calibrate the
remote mouse
When ticked the unit
will attempt to switch
to Absolute Mouse
mode (recommended). If
the computer does not
support this then it will
display a warning and
return to relative mouse
mode.
17