Miele CVA 4060 Operating And Installation Manual page 78

Problem solving guide
78
. . . the slide control for the grinder setting will not move.
^ Close the machine door and dispense a cup of espresso
coffee.
The grinder setting slide control will now move.
. . . the brew unit cannot be removed.
The brew unit is not in the correct position.
^ Close the door and switch the machine on.
The brew unit will position itself correctly.
. . . the error message 73 appears in the display
The brew unit may be dirty which is preventing it from being
put back into position.
^ Press the right hand control.
^ Take the brew unit out of the machine and clean it
thoroughly (see "Cleaning and Care - Brew unit").
^ Place the brew unit back in the machine and close the
door.
If the error message appears again please call the Miele
Service Department.
. . . the ground coffee chute cover cannot be pushed in
properly.
^ Is the lid of the ground coffee chute closed?
. . . it is difficult to open or close the machine door and the
seal on the connection between the coffee outlet and the
brew unit has been stripped.
^ Align the door using the hinges
(see "Installation: Adjusting the door hinges").