Miele CVA 4060 Operating And Installation Manual page 76

Problem solving guide
76
. . . the heating-up time is getting longer, the amount of
water coming through is incorrect and the machine is not
performing properly.
The machine needs descaling.
. . . no water comes out of the spouts.
The filters in the brew unit are dirty.
^ Clean the filters by rubbing them with your finger.
. . . the brew unit or the waste container cannot be pulled
out of the machine.
The brew unit is not in the correct position. This can happen
if, for example, the machine door is opened during grinding
or brewing.
^ Close the machine door. The brew unit will position itself
correctly automatically.
. . . the crema is not as it should be.
^ Check that the grinder setting is not too coarse or too fine.
^ Check the temperatures the different types of coffee have
been set to. If the temperature is too high, there will be dark
patches in the crema.
The coffee is no longer fresh enough.
The coffee blend is unsuitable.
The coffee spouts have been set too high.
. . . the fault message 10 or 17 appears.
Water has not been taken in.
^ The water container has not been correctly positioned
inside the machine. Remove the water container and push
it back into position again, making sure it is positioned
correctly.
^ This error message also appears if the water container was
not correctly filled for descaling. Fill the water container up
to the k mark.