Features - Miele H 4330 Pyrolytic Operating Instructions Manual

Pyrolytic ovens
Table of Contents

Advertisement

Description of the appliance

Features

Electronic controls
In addition to operating the various
cooking programmes to bake, roast
and grill the electronic controls also
offer the following features:
– Clock display
– Minute minder
– Timer to automatically switch cooking
programmes off, or on and off with
automatic use made of residual heat
– Settings can be customised
– System lock, to prevent the
appliance being used unintentionally
– Safety cut-out.
Cooling system
As soon as the oven is switched on, a
cooling fan is automatically engaged.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
6
Pyrolytic self-cleaning programme
The oven interior can be kept clean by
using the Pyrolytic . cleaning
programme.
This programme heats the oven interior
up to 460 °C. Any residual soiling is
broken down and reduced to ash by
the high temperatures.
For safety reasons the door is locked at
the beginning of the pyrolytic
programme.
This oven offers three programme
durations for pyrolytic cleaning.
– PY 1 lasting approx.
2 hours 15 minutes
– PY 2 lasting approx. 2 hours 35 mins
– PY 3 lasting approx. 2 hours 55 mins
For safety reasons the door will remain
locked until the temperature in the oven
cavity has dropped below 280 °C.
See "Cleaning and care" for more
information.
PerfectClean treated surfaces
The following surfaces are all treated
with PerfectClean enamelling:
– Runners
– Baking tray
– Grill pan
– Rack
PerfectClean enamelled surfaces have
very good anti-stick properties and are
much easier to keep clean than
conventional enamel, if cleaned
regularly.
See "Cleaning and care" for more
information.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H 4430 pyrolyticH 4330H 4430

Table of Contents