Safety Features; Door Lock For Pyrolytic Mode - Miele H 4330 Pyrolytic Operating Instructions Manual

Safety features

Door lock for pyrolytic mode

For safety reasons the door is
automatically locked at the beginning of
the pyrolytic programme.
At the end of the programme it will not
be unlocked until the temperature
inside the oven has dropped to below
280 °C.
If the Pyrolytic . cleaning programme
has been started by mistake or if the
process is interrupted, the door lock will
be released:
– immediately if the temperature is
below 280 °C.
The door can then be opened about
30 seconds later.
– not until the oven interior temperature
is below 280 °C if the temperature
inside the oven is higher than
280 °C.
16
Safety cut-out
This is a safety feature to protect the
oven if it has been operating for an
exceedingly long period.
The length of time depends on the oven
function selected.
Once this time has elapsed, the oven
will switch itself off automatically.
The fault code "F55" will appear in the
display.
The oven can be used again immedi-
ately by simply turning the programme
selector to "0" and entering the process
again.