Adaptec Storage Manager User Manual page 75

For direct attached storage
Hide thumbs Also See for Storage Manager:
Table of Contents

Advertisement

4
In the Physical Devices panel, select the drives you want to use to create the individual
JBOD disks.
5
Click Next to review the JBOD disk settings. To make changes, click Back.
This example shows three JBOD disks ready to be created.
6
Click Apply, then click Yes.
Adaptec Storage Manager creates the JBOD disks.
Converting a JBOD Disk to a Simple Volume
You can convert a JBOD disk to a simple volume. Unlike a JBOD, a simple volume is a true
logical device. It comprises a single physical disk and is not redundant.
To convert a JBOD to a simple volume:
1
In the Physical Devices View, select a JBOD disk.
2
In the menu bar, select Actions, then click Create simple volume.
Adaptec Storage Manager converts the JBOD to a simple volume and displays the logical
drive in the Logical Devices View.
Chapter 6: Modifying Your Direct Attached Storage
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents