Adaptec Storage Manager User Manual page 110

If the test fails:
a
Ensure that the receiving system is powered on and running Adaptec Storage
Manager.
b
Open the receiving system's System Properties window (see
double-check the TCP/IP address and port number.
c
Try sending the test event again.
Modifying a System's Information or Remove a System
Follow the instructions in this section to specify a notification level for a system, or change the
TCP/IP information or host name of a system.
Note:
If the system receives notifications from more than one system, be sure you enter the
updated information on all affected systems.
To modify system information:
1
In the Enterprise View, select the system you want.
2
On the tool bar, click Configure, point to the system, then click Notifications.
The Notifications Manager opens.
3
Select the system you want to modify.
4
In the System Properties window, enter the new information or select a new notification
level in the Event Type drop-down menu, then click OK.
Or,
In the tool bar, click Delete system, then click Yes to confirm the deletion.
Modifications become effective immediately. If you have deleted a system but you still
want to be notified about status and activity by logged notifications, ensure that there is at
least one system on the Notifications list. (See
Chapter 9: Monitoring Status and Activity
Step 4 on page
page 107 to add a new system.)
110
●
110) and