Protecting Your Data; Creating And Managing Hot Spares - Adaptec Storage Manager User Manual

Creating and Managing Hot Spares

A hot spare is a disk drive that automatically replaces any failed drive in a logical drive, and can
subsequently be used to rebuild that logical drive. (For more information on recovering from a
disk drive failure, see
Hot Spare Limitations
You can't create a hot spare for RAID 0 logical drives, simple volumes, or spanned volumes.
●
You can't create a hot spare from a disk drive that is already part of a logical drive.
●
You should select a disk drive that is at least as big as the largest disk drive it might replace.
●
Adaptec recommends that you not designate a SAS hot spare for a logical drive comprising
●
SATA disk drives, or a SATA hot spare for a logical drive comprising SAS disk drives.
Dedicated Spare or Global Spare?
A global hot spare is not assigned to a specific logical drive and will protect any logical drive on
the controller (except RAID 0 logical drives). You can designate a global hot spare before or
after you build logical drives on a controller; you can also designate a global hot spare while
you're creating a logical drive. To designate a global hot spare, see
A dedicated hot spare is assigned to one or more specific logical drives and will only protect
those logical drives. (A dedicated hot spare that has been assigned to protect more than one
logical drive is called a pool spare.) You must create the logical drive before you can assign a
dedicated hot spare. To assign a dedicated hot spare or pool hot spare, see
Designating a Global Hot Spare
This section describes how to designate a global hot spare before or after you build a logical drive.
Note:
To designate a global hot spare while you're creating a logical drive, see
To designate a global hot spare:
1
In the Enterprise View, click the controller on which you want a global hot spare.
2
In the Physical Devices View, click the disk drive you want to designate as a hot spare. (See
Hot Spare Limitations
3
Click the Create global hot-spare drive button.
A plus sign appears beside the selected disk drive, indicating that it's designated as a hot
spare. (A yellow plus sign indicates an error. See
56 for help solving the problem.) A plus sign also appears beside each existing logical drive.
Any other logical drives created on the controller will automatically be protected by that
global hot spare.
page 138.)
for help selecting a disk drive.)
Chapter 5: Protecting Your Data
page 55.
page
Step 7 on page
What Do the Hot Spare Icons Mean? on page
55
●
56.
39.