Adaptec Storage Manager User Manual page 41

10
If you have no other available disk drives, skip to
If you have available disk drives and want to create additional logical drives, click Add
logical device to open a new tab in the wizard.
Tab for second logical drive
11
Repeat Steps 4 to 10 for each logical drive that you want to create on the controller.
12
Click Next, then review the logical drive settings.
This example shows two logical drives with RAID 5 are ready to be created.
To make changes, click Back.
Note:
Some operating systems have size limitations for logical drives. Before continuing, verify
that the size of the logical drive is appropriate for your operating system. For more information,
refer to your operating system documentation.
13
Click Apply, then click Yes.
Adaptec Storage Manager builds the logical drive(s), indicated by a magnifying glass
moving across the new logical drive icon in the Logical Devices View.
A magnifying glass means that a logical drive is being built.
It disappears once the logical drive has been created.
The logical drive power timers window opens.
Chapter 3: Building Your Storage Space
Step 12.
41
●