Disabling Power Management For A Logical Drive - Adaptec CDP-00278-02-A User Manual

3. Click the Power Management tab.
4. In the Stay Awake Period drop-down list, select
Note: This field is set to Enabled and grayed out if you enabled power management
when you created the logical drive.
5. Enter the stay awake period start time and end time in 24-hour, hhmm, format; for example, 0900
for 9AM, 1400 for 2PM, and so on.
6. Select the days of the week to enforce the stay awake period. On days that you do not select, the
stay awake period is disabled and the spin rate is controlled by the logical drive's power timer settings
(see Setting Power Management Options for a Logical Drive
7. Click Apply.

Disabling Power Management for a Logical Drive

You can disable power management for a logical drive. You may choose to disable power management
for the drives on a high-volume server or a logical drive that needs to be highly available.
To disable power management for a logical drive:
1. In the Enterprise View, select a controller, then select a logical drive on that controller.
2. On the ribbon, in the Logical Disk group, click Set Properties.
The Set Properties window opens.
3. Click the Power tab.
4. In the Power Settings drop-down list, select
5. Click OK.
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00278-02-A Rev. A, Issue:
maxView Storage Manager User's Guide
.
Enabled
on page 68).
.
Disabled
70