Custom Configuration - Adaptec CDP-00278-02-A User Manual

Custom Configuration

Custom configuration helps you build your storage space manually by stepping you through the process
of creating logical drives, setting RAID levels, and configuring other settings.
To build your storage space with the Custom configuration method:
1. In the Enterprise View, select a system, then select a controller on that system.
Note how many available disk drives are connected to the controller; this information will be helpful
as you create the logical drives in the wizard.
2. On the ribbon, in the Logical Disk group, click Create Logical Drive.
3. When the wizard opens, select Custom Configuration, then click Next.
4. Select a RAID level, then click Next.
Note: Not all RAID levels are supported by all controllers. For example, RAID 5EE
and JBODs are supported on Adaptec Series 6 controllers only.
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00278-02-A Rev. A, Issue:
maxView Storage Manager User's Guide
41