Intergraph InterServe 800 SL System Setup page 86

74
Event Logging
When Enabled, this setting allows logging of DMI events. The default setting is Enabled.
ECC Event Logging
When Enabled, this setting allows logging of Error Checking and Correction (ECC) events.
The default setting is Enabled.
View DMI Event Log
Highlight this setting and press to view the contents of the DMI event log.
ENTER
Mark DMI Events As Read
After you have viewed the contents of the DMI event log, highlight this setting and press
to mark all DMI events as read.
ENTER
Clear All DMI Event Logs
Selecting Yes for this setting will clear the DMI event log after the system reboots. The
default setting is No.