Installing Windows Nt Server 4.0 - Intergraph InterServe 800 SL System Setup

94

Installing Windows NT Server 4.0

CAUTION If your system is equipped with an internal RAID section or an external RAID disk array, and
your system drive is part of the RAID set, you must select the RAID level and configure the
RAID before you start Windows NT Setup and install Windows NT Server. Refer to the
InterRAID documentation for instructions on configuring the RAID disk array. Then return to
this document and install Windows NT Server.
Follow the instructions in Start Here to install Windows NT. As you install the operating
system:
u
Select Custom Setup.
u
Press 8 to accept the End User License Agreement (EULA).
F
u
Press S to install the SYMSCSI driver from backup diskette if you have a Symbios SCSI
based system, or MEGARAID if you have a RAID based system. If you have both,
install SYMSCSI first, then press S again to install MEGARAID.
u
You can safely select the default responses for other options in Setup. Refer to Chapter
2 for instructions on installing the network adapter.
u
Create an Emergency Repair Disk when prompted.
After installing the operating system:
u
Restart the system.
u
Install the InterSite software products, as described in the
product.
u
Configure the system as described in Chapter 3, "Configuring the System."
u
Perform any additional installation and configuration tasks described in the Late-
Breaking News document delivered with your system.
. file for each
README TXT