Displaying Logs; Command List; Table 39 Log Categories And Available Settings; Table 40 Log Command List - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

Chapter 13 Log Screens
Use sys logs category followed by a log category and a parameter to decide what to record

Table 39 Log Categories and Available Settings

LOG CATEGORIES
error
mten
0
Use to not record logs for that category,
alerts for that category, and
Use the sys logs save command to store the settings in the ZyXEL Device (you must do this in order
to record logs).

13.7.2 Displaying Logs

Use the sys logs display command to show all of the logs in the ZyXEL Device's log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual ZyXEL
Device log category.
Use the sys logs clear command to erase all of the ZyXEL Device's logs.

13.7.3 Command List

The following table provides the commands that can be used for your ZyXEL Device to
configure the log settings.

Table 40 Log Command List

KEYWORD
client
ipaddr
port
Email server
Email subject
Email Address
Email SmtpAuthEnable
Email User
Email Password
Email Schedule
Email Day
Email Hour
Email Minute
Email Clear
Email Now
120
AVAILABLE PARAMETERS
0, 1, 2, 3
0, 1
1
to record only logs for that category,
3 to record both logs and alerts for that category.
DESCRIPTION
Enable SYSLOG client
SYSLOG server IP address
SYSLOG server port
E-mail server address
E-mail subject
E-mail address
SMPTP auth enable when e-mail log
E-mail user name
E-mail password
E-mail schedule mode
E-mail schedule day
E-mail schedule hour
E-mail schedule minute
Clear log after e-mail
Send e-mail now
2
to record only
ZyXEL NWA-1100 User's Guide