Procedure For Configuring A Device; Context-Sensitive Menus; Figure 14 Java Applet Window; Table 1 Menus Overview - ZyXEL Communications Vantage CNM User Manual

Vantage CNM User's Guide
• If you click an administrator icon in the object tree, the System > Administrators menus
will appear.
Note: You can only configure a single device at one time.

Table 1 Menus Overview

DEVICE CONFIGURATION BUILDING BLOCK
Status Select Device BB
Registration General
Synchronize LAN
Firmware Mgmt WLAN
Firmware Upgrade DMZ
Configuration File WAN
SchedulerList NAT
Static route
VPN
Firewall
Device Log
ADSL Monitor
X Auth
Device Alarm
DNS

2.4 Procedure For Configuring A Device

The default when you first enter Vantage is the root node in the object tree and Device >Status
menu.
1 Select a device in the object pane.
2 Select an item from a drop-down menu (Device, Configuration, Building Block, System,
Monitor or Report). If the selected device does not have a certain configuration, DMZ or
wireless for example, then DMZ or WLAN will appear grayed out in the Configuration
menu list.
3 That menu for the selected device then appears in the Content pane.

2.5 Context-Sensitive Menus

Some context-sensitive menus appear with the words Java Applet Window as follows:

Figure 14 Java Applet Window

If you do not want to see Java Applet Window in context-sensitive menus, then do the
following:
47
SYSTEM
Device BB Administrators
Configuration BB Status
Component BB Upgrade
License
Preferences
Maintenance
Address Book
Log
Certificate Mgmt
About
REPORT MONITOR
Bandwidth Alarm
Service Firmware Report
Web Filter Status Monitor
Attack VPN Monitor
Authentication
Log Viewer
System
Report
Chapter 2 GUI Introduction
LOGOUT
Logout