Procedure For Configuring A Device; Table 1 Menus Overview - ZyXEL Communications VANTAGE CNM 2.0 User Manual

Vantage CNM 2.0 User's Guide
• Some menus are not accessible because administrators do not have permission.
• Vantage can remember device and configuration menus. If for example, you select device
A, then select DMZ in the Configuration File menu and then change to device B. The
configuration DMZ will appear for device B. If device B does not have a DMZ, then the
Device > Status screen will appear.
• If the selected device does not have a certain configuration, DMZ or wireless for
example, then DMZ or WLAN will appear grayed out in the Configuration menu list. If
this happens and you cannot access the last click menu, then you will be redirected to
Device > Status page by default.
• If you click an administrator icon in the object tree, the System > Administrators menus
will appear.

Table 1 Menus Overview

DEVICE
Status
Registration
Synchronize
Firmware Mgmt
Firmware Upgrade
Configuration File

2.8 Procedure For Configuring A Device

The default when you first enter Vantage is the root node in the object tree and Device >Status
menu.
1 Select a device in the object pane.
2 Select an item from a drop-down menu (Device, Configuration, Building Block, System
or Monitor). If the selected device does not have a certain configuration, DMZ or wireless
for example, then DMZ or WLAN will appear grayed out in the Configuration menu list.
3 That menu for the selected device then appears in the Content pane.
39
Note: You can only configure a single device at one time.
BUILDING
CONFIGURATION
BLOCK
Select Device BB Device BB
General
Configuration BB
LAN
Component BB
WLAN
DMZ
WAN
NAT
Static route
VPN
Firewall
Device Log
ADSL Monitor
Device Alarm
SYSTEM MONITOR
Administrators Alarm
Status Firmware Report
Upgrade Status Monitor
License VPN Editor
Preferences
Maintenance
Address Book
Certificate Mgmt
Logs
About
Chapter 2 GUI Introduction
LOGOUT
Logout