Adding A Configuration Bb; Figure 132 Building Block > Configuration Bb > Add; Table 104 Building Block > Configuration Bb > Add - ZyXEL Communications Vantage CNM User Manual

Table 103 Building Block > Configuration (continued)
TYPE
Note
Add
Delete

18.4.1 Adding a Configuration BB

Click Add from
Configuration BB. When you add a new Configuration BB, you must choose what device
type and BB configuration type you wish to add, from the Device and Type list boxes
respectively.
Figure 132 Building Block > Configuration BB > Add
The following table describes the fields in this screen
Table 104 Building Block > Configuration BB > Add
TYPE
Name
Device
Type
Note
Next
Cancel
After you click Next in
Device and Type fields you selected in
General configuration BB for a ZyWALL 10 device. Create the BB as shown in the screen.
Refer to the corresponding Configuration chapter for details on fields in the screen. Click
Apply to save BB changes (you may click Reset to begin configuring the screen afresh) and
then click Finish to complete the BB.
Chapter 18 Building Blocks (BBs)
DESCRIPTION
This field displays some extra description of the BB
Click to proceed to the next screen.
Click to delete a selected device BB.
Figure 131 on page 257. Type a Name to identify your existing or new
DESCRIPTION
Type a unique name for the building block.
Select the device type. The configuration BB's available differ for each device.
Select the configuration. Choices available depend on the device selected.
Type some extra description of the BB
Click Next to continue to the configuration BB details for the device type selected.
Click Cancel to return to the Building Block > Configuration BB summary screen.
Figure 132 on page 258, the next screen that appears depends on the
Figure 132. Figure 132
Vantage CNM User's Guide
and Figure 133 show the
258