Figure 4-7 Menu 11.7 - Traffic Redirect Setup; Table 4-4 Traffic Redirect Setup - ZyXEL Communications Prestige 650ME User Manual

FIELD
Active Press [SPACE BAR] and select Yes to enable traffic redirect setup.
When the Active field is Yes, you must configure every field in this screen
unless you are using PPPoE encapsulation.
If you don't configure these fields and are using PPPoE encapsulation,
then the Prestige checks the PPPoE channel to determine if the WAN
connection is down.
Configuration:
Backup Enter the IP address of your backup gateway in dotted decimal notation.
Gateway IP
The Prestige automatically forwards traffic to this IP address if the
Address
Prestige's Internet connection terminates.
Metric Enter a number from 1 to 15 to set this route's priority among the
Prestige's routes .The smaller the number, the higher priority the route
has.
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC]
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Remote Node Configuration
Menu 11.7 - Traffic Redirect Setup
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 15
Press ENTER to Confirm or ESC to Cancel:
Figure 4-7 Menu 11.7 – Traffic Redirect Setup

Table 4-4 Traffic Redirect Setup

DESCRIPTION
Prestige 650ME ADSL Bridge
EXAMPLE
(default)
No
0.0.0.0
15
4-11