Applying Filters; Figure 5-7 Sample Filter Rules Summary – Menu 21.3; Table 5-4 Filter Set Types - ZyXEL Communications Prestige 650M-17 User Manual

Prestige 650M-17 ADSL Modem
# A Type
- - ---- --------------------------------------------------------------- - - -
1 Y Gen
2 N
3 N
4 N
5 N
6 N
This shows what you configured in
the previous menu.
After you have created the filter set, you must apply it.
Step 1. Enter 11, in the main menu, to display menu 11.
Step 2.
Enter the remote node number to edit.
Step 3. Make sure the Edit Filter Sets field is set to Yes and press [ENTER] to display menu 11.5.
Step 4. Apply the example filter set (for example, filter set 3) in this menu as shown in the next section.
5.5

Applying Filters

This section shows you where to apply the filters after you design them. Filter rules may be configured in
menu 21.
FILTER SETS
Input Filter Sets:
Output Filter Sets:
5-8
Menu 21.3 - Filter Rules Summary
Off=9, Len=4, Mask=789abcde, Value=789abcde
Enter Filter Rule Number (1-6) to Configure: 1
Figure 5-7 Sample Filter Rules Summary – Menu 21.3

Table 5-4 Filter Set Types

Apply filters for incoming traffic. You may apply device filter rules.
See earlier in this chapter for information on filters.
Apply filters for traffic leaving the Prestige. You may apply device
filters. See earlier in this section for information on filters.
Filter Rules
M = N means an action can be taken immediately. The
action is to drop the packet (m = D) if the action is
matched and to forward the packet immediately (n = F) if
the action is not matched no matter whether there are
more rules to be checked (there are not in this example).
DESCRIPTION
M m n
N F D
Filter Set Configuration