Procedure To Use The Reset Button; Prestige Smt Overview - ZyXEL Communications Prestige 650M-17 User Manual

2.7.2 Procedure To Use The Reset Button

Make sure the SYS LED is on (not blinking) before you begin this procedure.
1. Press the RESET button for ten seconds, then release it.
2. If the SYS LED begins to blink, the defaults have been restored and the Prestige restarts.
2.8

Prestige SMT Overview

The following figure gives you an overview of the various SMT menu screens of your Prestige.
Hardware Installation and Initial Setup
Prestige 650M-17 ADSL Modem
2-7