Table of Contents
Advertisement
FIELD
ISP's Name
Encapsulation
Multiplexing
VPI #
VCI #
ATM QoS Type
Peak Cell Rate
(PCR)
Sustain Cell Rate
(SCR)= 0
Maximum Burst Size
(MBS)= 0
My Login
My Password
When you have completed this menu, press [
your configuration, or press [
If all your settings are correct your Prestige should connect automatically to the Internet. If the connection
fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.
Internet Access
Table 3-3 Internet Access Setup Menu Fields
Enter the name of your Internet Service Provider. This
information is for identification purposes only.
SPACE BAR
Press [
] to select the method of encapsulation
used by your ISP. Choices are PPPoA or RFC 1483.
SPACE BAR
Press [
] to select the method of multiplexing
used by your ISP. Choices are VC-based or LLC-based.
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
Press [SPACE BAR] and select CBR (Continuous Bit Rate) to
specify fixed (always-on) bandwidth. Select UBR (Unspecified
Bit Rate) for applications that are non-time sensitive, such as
e-mail.
This is the maximum rate at which the sender can send cells.
Type the PCR.
Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be less
than the PCR.
Refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS. The MBS must be less than 65535.
Enter the login name that your ISP gives you.
Enter the password associated with the login name above.
ENTER
ESC
] at any time to cancel.
DESCRIPTION
] at the prompt "Press ENTER to Confirm..." to save
Prestige 650M-17 ADSL Modem
EXAMPLE
Change Me
RFC 1483
LLC-based
(default)
(default)
0
33
UBR
(default)
0
0
0
N/A
N/A
3-7
Advertisement
Table of Contents
