5.5.1 Remote Node Filters
Go to menu 11.1 (shown next) and type the number(s) of the filter set(s) as appropriate. You can cascade up
to four filter sets by typing their numbers separated by commas.
Press ENTER to Confirm or ESC to Cancel:
Filter Set Configuration
Menu 11.1 - Remote Node Profile
Rem Node Name= Change Me
Active= Yes
Encapsulation= RFC 1483
Multiplexing= LLC-based
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Figure 5-8 Filtering Remote Node Traffic
Prestige 650M-17 ADSL Modem
Bridge:
Ethernet Addr Timeout(min)= 0
VPI #= 0
VCI #= 33
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Filter Sets:
Input Device Filters=
Output Device Filters=
5-9