Table of Contents
Advertisement
FIELD
Rem Node Name
Active
Encapsulation
Multiplexing
Incoming:
Rem Login
Rem Password
Outgoing:
My Login
My Password
Authen
Bridge:
Ethernet Addr
Timeout(min)
Remote Node Configuration
Table 4-1 Remote Node Profile Menu Fields
Type a unique, descriptive name of up to eight characters for this
node.
Press [SPACE BAR] and then [ENTER] to select Yes to activate or
No to deactivate this node. Inactive nodes are displayed with a
minus sign "–" in SMT menu 11.
PPPoA refers to RFC-2364 (PPP Encapsulation over ATM
Adaptation Layer 5).
If you select RFC 1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) then Rem Login, Rem Password, My Login
and My Password fields are not applicable (N/A).
Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either VC-based or LLC-based.
Type the login name that this remote node will use to call your
Prestige. The login name and the Rem Password will be used to
authenticate this node.
Type the password used when this remote node calls your
Prestige.
Type the login name assigned by your ISP when the Prestige calls
this remote node.
Type the password assigned by your ISP when the Prestige calls
this remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP – Your Prestige will accept either CHAP or PAP when
requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
PAP – accept PAP (Password Authentication Protocol) only.
Type the time (in minutes) for the Prestige to retain the Ethernet
Address information in its internal tables while the line is down. If
this information is retained, your Prestige will not have to recompile
the tables when the line comes back up.
DESCRIPTION
Prestige 650M-17 ADSL Modem
EXAMPLE
Change Me
Yes
(default)
RFC 1483
(default)
LLC-based
(default)
CHAP/PAP
0
4-3
Advertisement
Table of Contents
