Telematrix Spectrum Plus SP750 User Manual page 32

To Verify Speed Dial Programming
(Administrator)
The contents of each speed dial location can be verified or "checked" while the
TM
Spectrum PLUS unit is in the programming mode.
•
Memory verification is accomplished with the Spectrum PLUS
To Verify Speed Dial Locations
1. Press and hold the "STORE" key quickly. The words "SET UP MONTH: 01"
will appear (figure 1).
2. Next, press the speed dial location key to verify. The display will show the
memory location, the name, and the number in memory.
3. To check other memory locations, simply press other speed dial locations.
4. To exit the program mode, press "DISC".
Note: Programming can
only be performed when
!
phone is on-hook
NOTE: A Caller ID record cannot be stored into the speed dial key memory
location. Entries can only be made manually by the Administrator programming
!
feature. This is for purposes of security and standardization of speed dial
locations.
NOTE: Blank index card sheets are provided for
convenience. Complete and place the index
!
card into the speed dial memory key.
32
TM
on-hook.