Telephone Functions - Telematrix Spectrum Plus SP750 User Manual

Programming Set Up Of the Spectrum PLUS
The Spectrum PLUS
The program is designed for one Administrator and one or more users. Administrator
programming features separate critical operating set up information from the user

telephone functions.

The Administrator Quick Program Guide for the Spectrum PLUS
The Spectrum PLUS
Additional detailed instructions are provided in the manual.
Programming is initiated
by holding down the
"STORE" key for six
seconds.
Set up pre-dialing number
sequence, i.e. outside
Set up local area code to
recognize local incoming
calls.
Set up either using key-
pad dialing with automatic
speaker activation, or
using key pad dialing,
pressing dial key to
activate.
Long distance restriction.
Restrict any outgoing
number dialing that
begins with a "1" .
Set up flash timing
100mS to 1000mS.
Default 600mS.
Set up pause timing 1.0S
to 5.0S. Default 3.6S.
TM
requires simple initial programming to set up the telephone.
TM
Quick Programming Guide is a summary list of set up options.
STORE
ENTER ACCESS NO.
ENTER AREA CODE
LIVE DIALPAD XXX
PRESS 1=ON 2= OFF
RESTRICT 1+
PRESS 1=YES 2= NO
FLASH TIME SET
PAUSE TIME x.x S
TM
Telephone
VOICE MAIL NO.
PIN NUMBER
SECOND OF WAIT?
CID RECORDS LOG
1 = TOTAL 2 = EACH
ALL SETUP OK
19
TM
Telephone
Set up voice mail number. Add
your PIN with seconds of wait
time to get access to messages.
PIN number characters will not
be displayed on the LCD.
Set up the Caller Log record
display to show same caller
separately logged or show
same caller in one line display
with number of incoming total
calls.