Thermal Conductivity Analyzer
Figure 5-1: Removing Fuse Cap and Fuse from Holder
3. Replace fuse by reversing process in step 1.
Remove Power to the instrument before changing fuses.
5.5
The Interconnection Panel and the Front Panel PCBs are accessed by
unlatching and swinging open the front door, as described earlier.
WARNING: SEE WARNINGS ON THE TITLE PAGE OF THIS
The 2010B Control Unit contains the following major components:
•
Power Supply
•
Preamp and Motherboard with Microcontroller
•
Display Board and Displays
•
Rear Panel Board.
Major Internal Components
MANUAL.
5 digit LED meter
2 line, 20 character, alphanumeric, VFD
Teledyne Analytical Instruments
Part I: Control Unit
Part I 5-3