Thermal Conductivity Analyzer
3.3
Figure 3-3 shows the Model 2010B Electrical Connector Panel. There
are terminal blocks for connecting power, communications, and both digital
and analog concentration outputs.
For safe connections, ensure that no uninsulated wire extends outside of
the connectors they are attached to. Stripped wire ends must insert com-
pletely into terminal blocks. No uninsulated wiring should be able to come in
contact with fingers, tools or clothing during normal operation.
3.3.1 Primary Input Power
The power terminal block and fuse receptacles are located in the same
rear panel assembly.
Electrical Connections (Rear Panel)
Figure 3-3: Rear Panel of the Model 2010B
Teledyne Analytical Instruments
Part I: Control Unit
Part I 3-3