The Model Screen; Checking Linearity With Algorithm - Teledyne 2010B Operating Instructions Manual

4 Operation
When the testing is complete, the results are displayed.
The module is functioning properly if it is followed by
indicates a problem in a specific area of the instrument. Refer to Chapter 5
Maintenance and Troubleshooting for number-code information. The results
screen alternates for a time with:
Then the analyzer returns to the initial System screen.

4.3.6 The Model Screen

Move the < > arrow key to
blinking, press Enter . The screen displays the manufacturer, model, and soft-
ware version information.

4.3.7 Checking Linearity with ALGORITHM

From the System Function screen, select
Enter .
Use the < > keys to select the range: 01, 02, or 03. Then press Enter .
Press Enter again.
Select and Enter
accomplished satisfactorily.
4-10 Part I
and press Enter . With
to check whether the linearization has been
Teledyne Analytical Instruments
Model 2010B
. A number
, and press