Verizon MI424-WR User Manual page 161

2. Select the local time zone from the drop-down list. The FiOS Router can
automatically detect daylight saving setting for selected time zones. If the
daylight saving settings for a time zone are not automatically detected, the
following four fields will be displayed:
Enabled
• - Select this check box to enable daylight saving time.
• Start - Date and time when daylight saving starts.
End
• - Date and time when daylight saving ends.
• Offset - The amount of time daylight saving time changes.
To perform an automatic time update:
1. Click in the "Enabled" check box in the "Automatic Time Update" section.
2.
Select the protocol to be used to perform the time update by selecting
either the "Time of Day" or "Network Time Protocol" radio button.
3. Specify how often to perform the update in the "Update Every" text box.
4.
Define time server addresses by clicking
"Automatic Time Update" section and entering the IP address or domain
name of the time server in the "Time Server Settings" screen.
8.6c Clock Set
Click on this button at the bottom of the Date and Time screen (which generates
the figure, below) to set the FiOS Router's time and date.
Add on the bottom of the
161
FiOS Router User Manual
© 2010 Verizon. All Rights Reserved.