Verizon MI424-WR User Manual page 74

5
Using Network Connections
5.4 Wireless Access Point Connection
General
The top part of the screen displays general communication parameters. We
recommend not changing the default values in this section unless familiar with
networking concepts.
Status Displays the status of the wireless access point connection.
When should this rule occur? Displays when the rule is active. To schedule
rules, see the "Advanced Settings" chapter.
Network Select the type of connection being configured from the drop-down
list (options: Network [Home/Office], Broadband Connection, or DMZ).
Connection Type Displays the type of connection.
Physical Address Displays the physical address of the network card used for
the network.
MTU MTU (Maximum Transmission Unit) specifies the largest packet size
permitted for Internet transmission. "Automatic" sets the MTU at 1500. Other
choices include "Automatic by DHCP, " which sets the MTU according to the DHCP
connection, and "Manual, " which allows the MTU to be set manually.
Additional IP Addresses
Clicking New IP Address generates the "Additional IP Address Settings" screen,
where additional IP addresses can be created to access the FiOS Router via the
Wireless Access Point connection.
© 2010 Verizon. All Rights Reserved.
74