Verizon MI424-WR User Manual page 118

6
Configuring Security Settings
6.9 Advanced Filtering
• Accept - Allow access to packets that match the source and destination IP
addresses and protocol ports defined in upper section of the screen. The data
transfer session will be handled using Stateful Packet Inspection (SPI).
Accept Packet
•
destination IP addresses and protocol ports defined in upper section of
the screen. The data transfer session will not be handled using Stateful
Packet Inspection (SPI), so other packets that match this rule will not be
automatically allowed access. This setting is useful when creating rules that
allow broadcasting.
6.9e Logging
Click in this check box to add entries relating to this rule to the security log.
6.9f Scheduler (When should this rule occur?)
If advanced filtering needs to be active constantly, select Always from the
"When should this rule occur?" drop-down list. If the rule will only be active at
certain times, select User Defined and click Add. Then, add a schedule rule (for
more details about schedule rules, see the "Advanced Settings" chapter of
this manual)
© 2010 Verizon. All Rights Reserved.
- Allow access to packets that match the source and
118