Verizon MI424-WR User Manual page 85

FiOS Router User Manual
Connection Type Displays the type of connection. Since this is a coaxial
connection, "Coax" is displayed.
Physical Address Displays the physical address of the network card used for
the network.
MTU MTU (Maximum Transmission Unit) specifies the largest packet size
permitted for Internet transmission. "Automatic" sets the MTU at 1500. Other
choices include "Automatic by DHCP, " which sets the MTU according to the DHCP
connection, and "Manual, " which allows the MTU to be set manually.
Coax Link
Check and configure the coax link connection in this section of the screen.
Auto Detection Select whether you want the FiOS Router to automatically
detect a coaxial link here.
Privacy Toggle "Privacy" by clicking in the "Enabled" check box. If Privacy is
activated, all devices connected via coaxial cable must use the same password.
We recommend leaving the Privacy option deactivated.
Password Enter the Coax Link password here.
CM Ratio Select the CM Ratio from the drop-down menu here.
WAN Coax Connection Speeds
This section displays the FiOS Router's Tx and Rx speeds (in Mbps).
Internet Protocol
This section includes three options: No IP Address, Obtain an IP Address
Automatically, and Use the Following IP Address.
No IP Address Select this option if the connection has no IP address. This is
useful when the connection is operating under a bridge.
85
© 2010 Verizon. All Rights Reserved.